Main Menu

Testing Slump in Your Concrete Mix and Why It Is Important

Measuring slump in concrete is a step that can be frustrating if not done properly.

How would you define slump?
According to the Tennessee Ready Mix Concrete Association, slump is a measurement of concrete’s workability, or fluidity.

Concrete an indirect measurement of concrete’s qualityIt’s an indirect measurement of concrete’s quality, states Gabriel Ojeda, president of Fritz-Pak Corp. in Dallas.

And Joe Daczko, group manager of concrete technology for Degussa Admixtures Inc. (formerly Master Builders) in Cleveland, maintains it’s a measurement for consistency, both from a quality-control perspective and to determine how fluid or stiff a material is.

However you define it, though, the bottom line remains the same: Slump is a test for the rigidity of uncured concrete. Lower slump concrete is very stiff, and higher slump concrete is more fluid.

Most people in the business agree that a typical slump for ordinary decorative concrete applications would be in the 4- to 5-inch range, but there’s no hard-and-fast rule. “The slump should match the application,” says Daczko. “It could be anywhere from 1 to 10 inches depending on what you’re doing. If you’re paving a road, you need a much stiffer material that can stand on its own. If you’re doing a wall, the flow needs to be much more fluid.” And if you’re pouring a patio, it needs to be somewhere in between.

Most decorative concrete contractors don’t conduct formal slump tests on the job, that doesn’t make using the proper slump any less important.
Photo courtesy of Grace Construction Products.

Sizing it up
Bob Harris, an industry leader and president of the Decorative Concrete Institute in Temple, Ga., says that although most decorative concrete contractors don’t conduct formal slump tests on the job, that doesn’t make using the proper slump any less important. “They need to understand the correlation [of slump] and how it affects the overall finish and structure of concrete,” he says.

Harris, who teaches concrete techniques across the country and beyond, likes to explain it this way to his students who are just getting started in the business: If you make grape Kool-Aid and it’s too strong, you add water. The new mixture isn’t as sweet and it’s not as deep a shade of purple. The same holds true for integrally colored concrete: If you change the slump by the addition of excess water, you change the makeup of the entire mixture as well as the intensity of the color.

If you add too much water to your mix, it dilutes the cement paste and weakens the concrete mixture which harms the integrity of the finished piece.
The 4- to 5-inch slump for decorative concrete is a relatively stiff mixture, but not quite as stiff as the 2- to 3-inch slump seen here. A higher slumped concrete is more more fluid and will flow some distance on its own. Photo courtesy of MC Magazine, National Precast Concrete Association.

“If you use excessive amounts of water, sometimes referred to as ‘water of convenience,’ it makes the concrete a lot more permeable,” Harris says. “It won’t stand up to the test of time in aggressive environments and to things like de-icing salts and certain chemicals that could attack the concrete.”

Basically, if you add too much water to your mix, it dilutes the cement paste and weakens the concrete mixture. The materials segregate, with the heavier aggregates sinking to the bottom, the sand staying in the middle and the cement floating to the top. “You end up with a cement-poor bottom and a cement-rich surface,” says Ojeda, adding that a weaker surface is prone to cracking due to cement’s inherent

shrinking qualities.

There’s a huge difference in adjusting the slump with chemicals rather than with water, Harris continues. By using water-reducing admixtures, you can change the slump without affecting the integrity of the concrete mix.

High-range water reducers, sometimes referred to as superplasticizers, increase the mix’s flow and helps with the concrete slump.
Photo courtesy of Degussa Admixtures.

High-range water reducers, sometimes referred to as superplasticizers, increase the mix’s flow, improve workability, disperse the cement more evenly and allow you to reduce the amount of water in your mix by a certain percentage, making for a more durable product in the long run. It must be kept in mind that they work for a limited amount of time.

The use of admixtures
There is a wide range of admixtures that can be used to “fix the mix,” says Ojeda, whose company is well known for its handy Fritz-Paks that can be tossed into the ready-mix truck at the job site, bag and all. Fritz-Pak Corp.’s admixtures are designed to restore loads of concrete that might otherwise be rejected and to improve the performance of problem concrete by modifying its characteristics and enhancing workability.

Admixtures can often save the day by increasing the slump without excessive water.
Photo courtesy of Degussa Admixtures.

There are any number of reasons why you would use an admixture, all of which have to do with improving characteristics of the concrete. “To ensure the best finished project, contractors should work with their ready-mix supplier to develop a mix design before the concrete is delivered to the job site,” Daczko advises. “Besides adjusting slump, there are admixtures that can be used to slow down the set of concrete or accelerate it, improve the strength, control cracking, protect against freeze-thaw cycles and add coloring, just to name a few.” Some admixtures make the concrete temporarily more fluid, so colors added to the mix disperse much better.

Admixtures can often save the day, Ojeda points out, by increasing the slump without excessive water. They can fix concrete that is not quite what you ordered and they also can fill in when your crew is shorthanded or limited on the number of stamps.

Using a technique called step retardation, he says, you can discharge half the concrete and retard the other half. You can start stamping at one end and work from soft to medium to hard before getting to the next section that’s just starting to set. Again, you go from soft to medium to hard to get a consistent pattern.

Adding an admixture to a concrete truck to help with the concrete slump.

Mike Costello, a regional manager with Dayton Superior, points out that admixtures have been around ever since they first started building concrete dams, but he marvels over the variety available today. “With the latest admixtures, you can have just about any slump you want. You just decide what you want your concrete to do and you can create a mix design to cause that to happen.”

Harris points out that not every job or application requires an admixture. But more contractors should be aware that help is there when they need it.

Related Content

High-performance Mix Design for Concrete Countertops

Gray concrete countertop with a hand-crafted finish.There seems to be a lot of misinformation surrounding the how and why of mix designs when it comes to concrete countertops. Some of the practices, such as leaving the countertop in the mold for days on end, made no sense to me. Failures were common.

Is Your Ready Mix Plant Ready for Integral Colors?

Retro computer monitor connected to pallets of pigments used to color integral colored concrete. Photograph courtesy of Davis ColorsComputerized systems make integral color to your concrete as easy as 1, 2, 3.